Model Name | R12 | R23 | R30 | R40 | J12 | J23 | J30 | J40 | L12 | L23 | L30 | L40 |
Rating Current(A) | 14.9 | 22.5 | 30.1 | 40.3 | 14.9 | 22.5 | 30.1 | 40.3 | 14.9 | 22.5 | 30.1 | 40.3 |
Input Voltage(V) | 380Vac(-15%) to 480Vac(+10%) | 440Vac(-15%) to 600Vac(+10%) | 208Vac(-15%) to 240Vac(+10%) | |||||||||
3Phase | 3 Phase | 3 Phase | ||||||||||
400 ~ 680Vdc | 550 ~ 850Vdc | 250 ~ 340Vdc | ||||||||||
Input Frequency | 48 ~ 62 Hz | 48 ~ 62 Hz | 48 ~ 62 Hz | |||||||||
Output Voltage | 0 to input voltage | |||||||||||
Output Frequency | 0.1 to 400 Hz | |||||||||||
Output current | 200 % | |||||||||||
Overload | 150% , continuous 1 minute | |||||||||||
Control System | Sensorless flux Vector , Sine coded PWM | |||||||||||
Frequency Resolution | 0.1Hz | |||||||||||
Frequency Linearity | 0.2% of maximum frequency | |||||||||||
Communications | Modbus , lonWorks , Metasys via RS-485 (option) | |||||||||||
Braking Mode | Dynamic braking (option) , Control stop | |||||||||||
Accel & Decel Adjustment | Independent Accel & Decel adjustment with S-curve | |||||||||||
Analogue Input/Output | 0~5V , 0~10V ; 0~20mA , 4~20mA | |||||||||||
Digital Input | 5 Degital input with programmable control functionality | |||||||||||
Relay Output | 2 relays type NO / NC with programmable functionality | |||||||||||
Local Control | Comprehensive local control include Start (FWD/REV) , Stop , Reset , and Set Speed | |||||||||||
Display Screen | 16 character*2 line alphanumeric , Backlight and auto contrast . | |||||||||||
Run Variables | Output frequency(Hz) , Motor Speed(RPM) , % Load , Output current(A) , Power(KW) , Output Voltage(V) , Temperature , I2t used process variable scale ,Error message,Inverter operation time | |||||||||||
Protection | Current limit , Over voltage(820Vdc maximum) , Under voltage(370Vdc Minimum) , Short circuit , Earth fault , Phase monitoring ,Motor electronic thermal overload , Over temperature, Momentary power failure protection | |||||||||||
Safety Standard | UL508C , AS3100 | |||||||||||
Enclosure Rating | IP30 (NEMA 1) & IP66 (NEMA 4) & IP66 stainless steel | |||||||||||
Operating Temperature | 0 ~ 40oC , -10 to 50oC with derating | |||||||||||
Relative Humidity | 95% RH , non-condensing | |||||||||||
Service Conditions | 1000M or less no derating : not subject to direct sunlight or corrosive/explosive | |||||||||||
Size for IP30 (H*W*D*) | 459*234*243(mm) | |||||||||||
Size for IP66 (H*W*D*) | 459*234*243(mm) |