R175 | R220 | R260 | R315 | R360 | R390 | R430 | R490 | |
Rating Current(A) | 175 | 220 | 260 | 315 | 360 | 390 | 430 | 490 |
Model Name | H175 | H220 | H260 | H315 | H360 | H390 | H430 | |
Rating Current(A) | 175 | 220 | 260 | 315 | 360 | 390 | 430 | |
Input Voltage(V) | 380Vac(-15%) to 480Vac(+10%), 3 Phase, 400 ~ 680Vdc | |||||||
Input Frequency | 48 ~ 62 Hz | |||||||
Output Voltage | 0 to input voltage | |||||||
Output Frequency | 0.1 to 400 Hz | |||||||
Output current | 200 % | |||||||
Overload | 150% , continuous 1 minute | |||||||
Control System | Sensorless flux Vector , Sine coded PWM | |||||||
Frequency Resolution | 0.1Hz | |||||||
Frequency Linearity | 0.2% of maximum frequency | |||||||
Communications | Modbus , lonWorks , Metasys via RS-485 (option) | |||||||
Braking Mode | Dynamic braking (option) , Control stop | |||||||
Accel & Decel Adjustment | Independent Accel & Decel adjustment with S-curve | |||||||
Analogue Input/Output | 0~5V , 0~10V ; 0~20mA , 4~20mA | |||||||
Digital Input | 5 Degital input with programmable control functionality | |||||||
Relay Output | 2 relays type NO / NC with programmable functionality | |||||||
Local Control | Comprehensive local control include Start (FWD/REV) , Stop , Reset , and Set Speed | |||||||
Display Screen | 16 character*2 line alphanumeric , Backlight and auto contrast . | |||||||
Run Variables | Output frequency(Hz) , Motor Speed(RPM) , % Load , Output current(A) , Power(KW) , Output Voltage(V) , Temperature , I2t used process variable scale ,Error message,Inverter operation time | |||||||
Protection | Current limit , Over voltage(820Vdc maximum) , Under voltage(370Vdc Minimum) , Short circuit , Earth fault , Phase monitoring ,Motor electronic thermal overload , Over temperature, Momentary power failure protection | |||||||
Safety Standard | UL508C , AS3100 | |||||||
Enclosure Rating | IP30 (NEMA 1) & IP66 (NEMA 4) & IP66 stainless steel | |||||||
Operating Temperature | 0 ~ 40oC , -10 to 50oC with derating | |||||||
Relative Humidity | 95% RH , non-condensing | |||||||
Service Conditions | 1000M or less no derating : not subject to direct sunlight or corrosive/explosive | |||||||
Size for IP30 (H*W*D*) | 1225*555*520(mm) | |||||||
Size for IP54 (H*W*D*) | -------------------- |